Ghost Controls Gate Motor Replacement Nationwide

Ghost Controls Gate Motor Replacement: The Boca Raton Owner’s Guide

We stock and install Ghost Controls gate motor replacements throughout Boca Raton, with most residential swing-gate motor swaps running $450 to $850 installed, depending on the model series and whether the arm bracket survived the failure. We carry Ghost Controls-compatible motors on the truck for same-day replacement in most Boca Raton neighborhoods, from Royal Palm Yacht & Country Club down to Boca Del Mar. Most owners discover the failure the same way: the gate beeps but won’t move, the motor hums and trips its internal breaker, or the gate opens halfway and stops like it forgot what it was doing.

Call (754) 666-7602

If your Ghost Controls opener is doing any of that, this page tells you what failed, what a replacement actually costs in Boca Raton, and what you should check before you spend a dollar.

Which Ghost Controls Models This Applies To

Ghost Controls runs three main residential lines: the original AXDP series, the newer AXD series, and the vehicle-detector-ready AXDP prosumer line. The easiest way to identify yours is the label on the underside of the arm housing – it lists the part number, the voltage (12V DC or 24V DC), and whether it’s a single or dual gate system. We see mostly AXDP and AXD models in Boca Raton, usually paired with Ghost Controls’ own swing arm brackets on ornamental aluminum gates in communities like Boca West and The Polo Club.

One compatibility gotcha that catches owners off guard: Ghost Controls changed the arm mounting bolt pattern between the AXDP and AXD generations. An AXD motor will not bolt onto AXDP brackets without an adapter plate, and we’ve fixed more than one homeowner install where someone forced the holes to line up. If you have an older Ghost Controls system and the arm is intact but the motor is dead, we can usually match the original part or supply a quality aftermarket equivalent with the correct mounting geometry. We are an independent service provider, not affiliated with Ghost Controls, which means we stock both OEM and equivalent parts and recommend whichever actually fits your gate.

Signs Your Ghost Controls Gate Motor Replacement Is Failing

• Gate moves six inches, then reverses or stops. The motor’s internal limit-sensing circuit has lost its calibration or the gearbox is stripping. You’ll hear it: a quick grind, then a click as the board cuts power. This is the most common failure we replace in Boca Raton, where humidity accelerates gear wear.
• Motor hums but the gate does not move. The arm’s drive gear has stripped or the capacitor is dead. A humming Ghost Controls motor is a motor drawing current against a mechanical stop, and leaving it powered makes the failure worse.
• Gate opens fine, but closes at half speed or stalls entirely. The motor’s torque has degraded, usually from water intrusion past a dried-out arm seal. Salt air near the Intracoastal doesn’t help.
• Control board clicks repeatedly, then the system goes dark. The motor is drawing more current than the board will allow, tripping the overload protection. We see this on Ghost Controls systems older than five years in Boca Raton.
• You can move the gate by hand with the motor disengaged, but the motor arm won’t stay engaged. The release mechanism or the arm’s internal latch has worn out. This one is often repairable without a full motor replacement, which is why we check it before quoting a swap.

Before

After

Replacement Cost & What’s Included

In Boca Raton, a Ghost Controls gate motor replacement typically lands between $450 and $850 installed. The spread comes down to three things: which Ghost Controls series you have, whether the arm bracket and mounting hardware can be reused, and whether your system is single or dual gate. A single AXDP motor with a reusable bracket sits at the low end. A dual AXD setup where both arms are worn and the brackets need replacement goes toward the top, sometimes over.

Our price includes the motor, the labor to remove the old unit and install the new one, calibration of the limit settings, and a documented photo record of everything we touched. You get a written price before any work starts, and that price is the price. We don’t surprise anybody at the end. The work is covered by our 365-Day Done Right Promise: if something isn’t right within a year, we fix it at no charge.

DIY or Call Us?

Ghost Controls motors run on low-voltage DC, so you are not dealing with line voltage at the arm itself. But the arm still holds mechanical tension, and the control board wiring runs back to an AC transformer that you should not touch while it’s live. What you can safely check: the fuse on the control board, the battery terminals if your system has backup batteries, and whether the arm’s manual release is fully seated. What you should not do: open the motor housing, pull the control board, or attempt to re-time the gear reduction yourself. We’ve seen one stripped arm gear turn into a bent gate bracket because someone kept forcing it.

If the gate is stuck closed and you need it open today, we run same-day replacement calls across Boca Raton. Call (754) 666-7602 and a live person answers, any hour.

FAQs

Call Vance Gate Repair Boca Raton

If your Ghost Controls gate motor has failed, we’ll match the right part, install it the same day, and leave you with a written price and a photo record of everything we did. That’s how Adrian Vance has run every gate job in Boca Raton since 2014: name what you found, name what it costs, leave the gate working. Call (754) 666-7602 for a free estimate, or to have a technician out today.

Written by Adrian Vance, Owner, Vance Gate Repair Boca Raton at Vance Gate Repair Boca Raton, serving Boca Raton and nearby areas.