Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Boca Raton Homeowners
A new gate in Boca Raton is either a decision you make once and live with for fifteen years, or a job you hire twice because the first contractor cut corners on the underground conduit or set the hinges without accounting for the sandy soil. We build for the first outcome. Adrian Vance started this company in 2014 doing commercial access control, where a gate that won’t close is a liability, not an inconvenience. That standard carried over. Every residential gate installation we do in Boca Raton starts with a written price, ends with a photo record of everything we set and installed, and the work is covered by a 365-Day Done Right Promise. If you’re researching gate installation, call (754) 666-7602 and you’ll get a live person, not a dispatch service.
What Our Gate Installation Service Includes
Driveway Gate
A driveway gate is the gate you use every day, the one that has to open and close reliably for years while standing up to salt air and Florida sun. We install both single and double driveway gates, always setting the posts in concrete below the root line and always pulling a dedicated power run rather than piggybacking on an existing circuit. Most Boca Raton driveway gate installations we do are swing or slide designs, and we’ll tell you honestly which one fits your setback and driveway pitch before you spend a dollar. The written quote includes the gate, the operator, the safety edges, and the labor, so there’s no line item that appears later that wasn’t there on day one.
Pedestrian Gate
A pedestrian gate is the smaller gate beside the driveway that lets people in and out without opening the full-size gate. It’s the gate that gets the most cycles and the least maintenance attention. We install pedestrian gates with matching hardware finish and the same post-depth standard as the driveway gate, which matters because a pedestrian gate that sags in eighteen months is a post problem, not a hinge problem. When the job involves a pedestrian gate next to a driveway gate, we coordinate both so the latch, the post diameter, and the material finish read as one installation rather than two separate projects.
Sliding Gate
A sliding gate is the right call for Boca Raton properties with a short driveway apron or a driveway that slopes toward the street, where a swing gate would either hit a car or scrape the pavement. We set the track and roller system with a laser level before the gate panel ever gets hung, because a sliding gate that drifts or binds is almost always a track alignment issue that was baked in at install. Cantilever sliding gates are an option when you don’t want a track across the driveway opening, and we’ll walk you through the steel size and counterweight math before you choose. Every sliding gate installation includes a written record of the final roller height and track position, photographed and left with you.
Swing Gate
A swing gate is what most Boca Raton homeowners picture when they think of a gated driveway: two panels that pivot on posts and open inward or outward. The installation hinges on the post footing, literally. We use larger diameter steel posts and deeper concrete than the minimum spec because Boca Raton’s sandy soil shifts more than clay, and a swing gate that sags is the result of a post that’s moving, not a hinge that’s failing. We also set the hinge geometry for the weight of the specific gate you choose, not a generic chart, so an iron gate and an aluminum gate get different hinge spacing and different operator settings.
Double Gate
A double gate is a pair of panels that meet in the middle, usually for wider driveway openings where a single swing panel would extend too far out over the yard. The two panels have to meet square at the center, and they have to stay square as the posts settle. We install double gates with a center stop plate and an opener system rated for the combined weight of both panels, not the weight of one panel times two. On wide openings we typically recommend operators on both posts with a synchronized control board, so the panels open in sequence instead of fighting each other.
Security Gate
A security gate is not a heavier version of a normal gate. It’s a system: gate, operator, photo-eyes, safety edges, and the access control that decides who gets in. We install security gates for Boca Raton homeowners who want the gate to actually stop a vehicle, which means the post footers, the hinge pins, and the operator’s force settings all have to be specified for the task. The access control side is where our commercial background matters, because a keypad that’s wired wrong or a receiver that’s mounted too far from the pedestrian path will cause more service calls than the gate itself. We test the full system three times before we hand it over, and you get a photo log of every setting.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and service FAAC operators on a regular basis in Boca Raton, and we stock the common replacement parts for their swing and slide models. FAAC hydraulically operated units are well suited to the heavy iron gates we see in the older waterfront neighborhoods, where the gate weight pushes smaller residential operators past their rated duty cycle.
Linear and BFT both show up frequently on the properties we quote in Boca Raton. Linear’s control boards are straightforward, and we set the limit and obstruction sensitivity on every Linear install with a handheld programmer rather than the little dip-switch guesswork that leaves gates reversed at full force. BFT builds operators that handle the long cycle counts of a busy household driveway, and we’ve installed enough of them to know the encoder settings and the thermal cutout behavior on their slide models. Viking is the fourth brand we commonly see, and it’s a brand we respect for gates that need to hold position in wind gust, which matters on the barrier-island side of Boca where the wind comes off the Intracoastal.
If you have another make already on the property, call us anyway. We work on whatever motor is there, and we won’t steer you toward a replacement when the existing unit can be serviced.
BeforeAfterSigns You Need Gate Installation Right Now
- Your gate is held together with tension straps and a cinder block. When a gate needs a counterweight to stay closed, the hinge or the post has already failed. We see this on older Boca Raton homes where the original install didn’t account for the soil movement, and the gate has to be reset with a deeper footing. The longer it stays propped, the more the panel twists and the harder it is to hang straight again.
- The post moves when you push the gate. A gate post that rocks is a structural failure, not a hardware issue. In Boca Raton’s sandy soil, an undersized post or a shallow concrete pour will show movement within two or three years. A new installation with a properly sized footing fixes the problem permanently; replacing the hinges only fixes it for a few months.
- You’ve had the same repair done twice in a year. If a technician has replaced the same limit switch or the same hinge bracket twice, the issue is the installation, not the part. You’re paying to rediscover the same problem. A new gate installation with a documented record of what was set and how it was measured ends that cycle, and you get a photo log showing the actual as-built condition so the next technician isn’t guessing.
- The opening is too wide for the gate panel you have. We see it on Boca Raton properties that started with a modest single panel and later widened the driveway for a third car or a boat trailer. The gate that once fit is now a swinging obstacle that can’t cover the opening without blocking the sidewalk. A properly sized replacement is an installation job, not a repair.
- You’re buying a home and the existing gate doesn’t close without a shove. A gate that fails to close on its own is a safety and liability issue on day one of ownership. Before you move the furniture in, you want a gate that stops, reverses, and locks without manual help. New installations we do in Boca Raton get a full cycle test on the safety edges and photo-eyes before we call the job complete.
Our Gate Installation Process - Step by Step
- 1
Site measurement and written quote. We come out to the property, measure the opening, check the soil at the post locations, and look at the existing power and where the conduit needs to run. You get a written price with the gate, the operator, the hardware, the concrete, the electrical run, and the labor all called out as separate line items. That quote is yours to keep whether you hire us or not.
- 2
Post setting and conduit. We dig the post holes to depth and pour concrete that extends below the root line so the posts don’t heave. The power run goes in rigid conduit, not direct-burial cable, and we photograph the trench before it’s backfilled so you have a record of where the line actually is, not where someone thinks they put it.
- 3
Gate panel installation and hang. The gate gets set on a laser level before the hinge welds or bolts are finalized. For a swing gate, we check the panel hangs true at full open and full close. For a slide gate, we set the track and rollers to the specific panel weight and measure the final roller height so the gate doesn’t drag on a hot day when the metal expands.
- 4
Operator and safety system setup. The motor gets installed and the force and limit settings get programmed for the gate’s actual weight and travel. We set the photo-eye height to catch anything from a child’s bike to a garbage can, and we test the obstruction reversal on both the open and close cycle three times. Every setting gets photographed and written into the job record.
- 5
Walkthrough and documentation. Before we leave, you get the full written record: what was installed, what the settings were, photos of the wiring, the conduit path, the hinge points, and the final gap measurements. The gate gets a full open/close cycle test with you watching. If anything is not right, it gets fixed before we call the job done, and the 365-Day Done Right Promise applies from that day.
How Much Does Gate Installation Cost in Boca Raton?
A pedestrian gate installation in Boca Raton typically runs $1,200 to $2,800 depending on the material, the post work, and whether it’s a standalone gate or matched to an existing driveway gate. For more on Gate Installation pricing, see the breakdown below. A single swing driveway gate with an operator usually lands between $4,500 and $8,000. A double driveway gate with synchronized operators and a full safety system runs $8,500 to $15,000, and a sliding gate is in roughly the same range, with the wide variance coming from the steel size, the track length, and the operator brand. On the high end, a custom iron double gate with access control on a wide opening can exceed $20,000.
What moves the price: post depth and concrete volume (Boca Raton’s sandy soil calls for more), the weight of the gate material, whether the operator is a residential unit or a commercial-grade FAAC or BFT, and how far the power has to run from the panel. What should never move the price after you sign: everything. Under the Haven Standard, the written quote is the price. There are no change orders you didn’t approve in advance and no line items that appear after the concrete is poured.
A free estimate from us includes the measurement, the soil check, the brand recommendation with your actual opening size, and a written price. You can take that estimate and get a second opinion, or bring us another company’s written estimate and we’ll review it at no cost. See our home page for more on how we work.
Gate Installation Near Boca Raton - Our Service Area
We install gates throughout Boca Raton and the surrounding communities. Most of our Boca Raton customers are in the neighborhoods east of I-95, but we regularly work in Gate Installation in Deerfield Beach and Gate Installation in Delray Beach as well. We also cover Lighthouse Point, Coconut Creek, Pompano Beach, Parkland, Margate, Boynton Beach, Coral Springs, Lauderdale-by-the-Sea, and North Lauderdale. The free estimate comes to you, not the other way around.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Boca Raton
Gate installation is the complete process of setting the posts, hanging the gate panel, installing the operator, and wiring the safety system and any access control. In our Gate Installation in Boca Raton, it also means accounting for sandy soil, salt air, and the wind that comes off the coast. The job is complete when the gate opens and closes under power, reverses on obstruction, and you have a written record of how everything was set.
A single driveway gate with an operator typically takes one to two days on site. A double gate or a sliding gate with custom steel work can take three to five days depending on the concrete cure time and whether the panel is fabricated to order. We’ll give you a schedule in the written quote before any work starts.
Pedestrian gates run $1,200 to $2,800, single driveway gates $4,500 to $8,000, and double or sliding gates $8,500 to $15,000. The range depends on gate material, post work, operator brand, and electrical run distance. Your written quote from us includes every line item, so the price you sign is the price you pay. Call (754) 666-7602 for a free site measurement and written estimate.
Yes. We install and service FAAC, BFT, Linear, and Viking operators, along with five other major brands. If you already have a FAAC on the property and want a new gate panel, we can keep the existing operator and match the new gate to it, which often saves you money compared to replacing both.
If your gate is stuck open or stuck closed and you need it fixed today, call (754) 666-7602. A live person answers 24 hours a day. For new installations, we don’t promise same-day work because a proper installation requires measurement, concrete, and material ordering, but we can usually schedule a site visit within a day or two.
Every installation is covered by our 365-Day Done Right Promise. If the gate is not right within one year of the install date, we make it right at no charge, no argument, no expiration within that window. The manufacturer’s warranty on the operator and hardware applies separately, and we’ll explain what’s covered before you buy.
Clear the area on both sides of the opening so we have room to work, and mark any irrigation lines or utilities you know about. If you have a landscaper, let us know so we can coordinate around the post locations. We handle the utility locate requests as part of the job, but any homeowner-provided information about underground lines saves time on site.
Schedule Your Gate Installation Service in Boca Raton Today
Call (754) 666-7602 and you’ll get a live person who can talk through your opening size, your gate material, and your operator options before we ever set foot on the property. The site visit is free, the written price is yours to keep, and there’s no obligation to hire us. If you have a written estimate from another company, bring it to the site visit and we’ll review it at no cost.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Boca Raton since 2014.