Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Pompano Beach, FL
Gate repair in Pompano Beach usually breaks down into two jobs: access control failures on HOA and townhome gates, and salt-damaged steel that needs parts replaced or welded. The Intracoastal canopy and ocean air push corrosion into motors, hinges, and control boards faster than almost anywhere else in Broward County. We carry parts for the older Linear, DoorKing, Viking, and Ghost Controls operators still common along Sample Road and Copans Road, and we price every job in writing before work starts. Call (754) 666-7602 and you’ll get a live person, not a queue.
Why Pompano Beach Homes Are Different
Pompano Beach’s grid of Intracoastal canals means salt air reaches gates well past the beach. Motors and boards that might run 12 to 15 years inland fail in 6 to 8 here. The housing stock compounds the problem: concrete-block HOA communities and townhome developments from the 1970s through the 1990s are concentrated along Sample Road and Copans Road, and many still run original ornamental iron swing gates on pillar mounts that were never engineered for decades of coastal exposure. We routinely find discontinued proprietary boards inside 1990s Linear and DoorKing operators, with the motor still mechanically sound but the electronics long out of production. Hurricane season adds a Broward County wind-load compliance layer to any swing-gate arm replacement, which changes both the engineering and the permit path.
Our Main Pompano Beach Services
Two services generate the most calls from Pompano Beach homeowners: access control repair and full gate repair, with installation and motor work close behind. Here’s how each applies to this city.
Gate Repair in Pompano Beach
Most repair calls here start as a gate that won’t open all the way, a hinge point that’s sagging, or an operator that trips its breaker after a storm. In Pompano Beach, the culprit is often salt-driven corrosion on the arm bracket or a limit switch that shifted when wind loaded the gate. We photograph every adjustment and hand you the record before we leave. Full details are on our Gate Repair in Pompano Beach page.

Gate Installation in Pompano Beach
Installation in Pompano Beach means working with Broward County wind-load requirements and, in many communities, HOA architectural approval before the first post hole is dug. We measure, price in writing, and schedule the work in phases so the property is never left unsecured overnight. See what a full install includes on our Gate Installation in Pompano Beach page.

Gate Motor & Opener in Pompano Beach
When a Pompano Beach gate moves slowly, reverses mid-travel, or hums without moving, the operator is usually the fault. Salt on the actuator arm and corroded wiring harnesses shorten motor life here, and many HOAs are still running discontinued boards. We service nine automation brands and replace only what’s failed. Read the specifics on our Gate Motor & Opener in Pompano Beach page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Pompano Beach

Gate access control in Pompano Beach is the dominant repair category in the city’s 1970s-1990s HOA communities, where original keypads, phone entry boxes, and card readers are reaching end-of-life together. Salt air corrodes keypad contacts and card reader housings, while discontinued boards leave many communities with a choice between repair and a retrofit we can scope in writing. Our Gate Access Control work covers keypads, remotes, phone entry, card readers, and video intercoms on whatever brand is already mounted.
Keypad Entry
Signs you need it
The keypad works intermittently, certain digits won’t register, or the housing shows white salt scaling around the buttons.
What it costs in Pompano Beach
Most keypad replacements in Pompano Beach run $185 to $450, depending on whether we can reuse the existing wiring or need to pull new cable through the pedestal.
How we do it
We test each key’s contact resistance, replace or rebuild the unit, then photograph the new keypad and the dip-switch settings inside the operator.
Phone Entry
Signs you need it
The gate won’t dial out, callers can’t hear the resident, or the unit works for some units but not others.
What it costs in Pompano Beach
Phone entry repairs in Pompano Beach generally run $250 to $650, with the higher end covering multi-line systems in older HOA communities.
How we do it
We trace the phone line at the pedestal, test the relay that trips the gate, and document every termination point we touch.
What Gate Access Control Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Keypad entry replacement | $185 - $450 |
| Phone entry repair | $250 - $650 |
| Video intercom install | $900 - $2,200 |
Can you repair the access control system without replacing the whole gate operator?
Almost always, yes. Most Pompano Beach access failures trace to the keypad, wiring, or relay rather than the motor itself. We isolate the fault first and replace only the failed part.
My HOA’s gate uses a brand that’s been discontinued. Can you still fix it?
Yes. We stock boards and remotes for older Linear, Viking, DoorKing, and Ghost Controls systems common in Pompano Beach communities. If a board is truly obsolete, we quote a retrofit in writing before any work. Call for specifics.
Gate Parts & Welding in Pompano Beach

Salt air is the real enemy of Pompano Beach gates, attacking hinges, steel frames, and the mounting posts themselves. In HOA communities built between the 1970s and 1990s, original ornamental iron is often thinned by rust at the hinge points. Our Gate Parts & Welding work covers hinge replacement, post repair, rail straightening, custom welding, and roller swaps on both swing and slide gates.
Hinge Replacement
Signs you need it
The gate sags, scrapes the drive, or the hinge barrel shows orange rust bloom and won’t take grease.
What it costs in Pompano Beach
Hinge replacement in Pompano Beach typically runs $450 to $1,400 per pair, depending on gate weight and whether the post needs reinforcing.
How we do it
We support the gate, cut out the old weld, burn off rust, weld the new hinge, and photograph the finished bead before painting.
Post Replacement
Signs you need it
The post leans, the gate drops when released, or you can see cracking at the base where salt water pooled.
What it costs in Pompano Beach
Post replacement in Pompano Beach runs $800 to $2,000, with the higher end covering concrete core-fill and hurricane tie-downs.
How we do it
We cut the post at grade, set a new one in concrete, shim it plumb, and record the measurements so the gate hangs level.
What Gate Parts & Welding Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Hinge replacement | $450 - $1,400 |
| Post replacement | $800 - $2,000 |
| Custom welding repair | $150 - $600 |
Can you weld an ornamental iron gate without replacing the whole section?
Yes. We weld in place whenever the surrounding metal is sound. On Pompano Beach gates, we often replace a corroded bottom rail while keeping the original pickets and scrollwork intact.
Do you handle the power run and the safety edges on a welded repair?
We handle the structural work and can coordinate the electrical with our motor service. Every repair leaves a written record of what was welded, what was replaced, and what was adjusted.
Brands We Service in Pompano Beach
We work on Linear, Viking, Ghost Controls, and DoorKing systems daily in Pompano Beach, and we keep common boards, remotes, and safety edges on the truck. That means fewer second trips and same-day fixes on most access-control calls. See our brands for the full list of nine manufacturers we service.
Pricing for Gate Repair in Pompano Beach, FL

| Service | Typical range in Pompano Beach |
|---|---|
| Keypad entry replacement | $185 - $450 |
| Phone entry repair | $250 - $650 |
| Video intercom install | $900 - $2,200 |
| Hinge replacement | $450 - $1,400 |
| Post replacement | $800 - $2,000 |
| Custom welding repair | $150 - $600 |
Salt damage pushes Pompano Beach prices up: a hinge that would be a simple swap inland often needs post reinforcement here. Every quote is written and handed over before we start, so the number you approve is the number you pay.
Neighborhoods We Serve in Pompano Beach
We cover the full Pompano Beach grid, from the canal-front communities east of US-1 to the HOA corridors along Sample Road and Copans Road. Dispatch from our Miami-area office puts a technician at your gate fast.
- Garden Isles
- Cypress Bend
- Cresthaven
- Collier City
- Harbor Village
Service Area - Cities Near Pompano Beach

The same crews serve Coconut Creek, FL, Margate, FL, Deerfield Beach, FL, and Coral Springs, FL. If you’re just over the city line, the service area still applies, and the written-price policy travels with us.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pompano Beach

Most calls in Pompano Beach get a same-day or next-day visit, depending on the failure. Storm surges push wait times out, so if your gate is hanging open after a named storm, call early and we’ll prioritize it.
For repairs on the existing gate, usually not. For replacements, changes to the operator type, or any structural work on a community entrance, most Pompano Beach HOAs require written approval first. We can prep the documentation.
It affects swing-gate arm replacements and any new post or foundation work. We handle the engineering and permit path on those jobs and fold it into the written quote before work begins.
If your gate is down in Pompano Beach, call (754) 666-7602. A live person answers, we schedule the visit, and you get a written price before any tool is picked up.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pompano Beach Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.





Before
After
Before
After