Elite Keypad & Intercom Repair Nationwide

Elite Keypad & Intercom Repair: The Boca Raton Owner’s Guide

An Elite keypad or intercom that won’t respond usually comes down to one of three things: a failed keypad membrane from Florida humidity, a corroded wiring connection at the keypad or the control board, or a dead intercom speaker from sun exposure. We stock Elite-compatible keypads and intercom components on the truck and typically complete the swap in Boca Raton the same day we diagnose it, with most keypad replacements running $245-$385 installed and intercom repairs landing between $195 and $420 depending on the module. The way most owners find us: the keypad lights up but won’t send a signal, or the intercom buzzes but nobody can hear a voice, or the whole unit went dark after a storm. That last one, in Boca Raton, usually means water found the housing.

Call (754) 666-7602

The part itself rarely fails all at once. What fails first on Elite keypads is the membrane overlay: the printed surface cracks under UV and the conductive pads underneath stop making contact. On Elite intercoms, the speaker cone dries out and the microphone element corrodes. The control board is usually fine, which is why we replace the failed component rather than the entire system unless the board shows water damage.

Which Elite Models This Applies To

We service the Elite keypad and intercom lines most common on Boca Raton properties: the Elite K200 and K400 series keypads, the Elite EKP-100 and EKP-200 pedestal-mount units, and the Elite IC-series intercom modules paired with SL-3000 and SL-5000 slide gate operators. If you’re not sure which model you have, there’s a label inside the keypad housing with the part number printed on a white sticker, usually starting with “EK” or “IC.” That number matters more than the gate operator model because Elite changed connector pinouts between keypad generations, and a K200 keypad will not plug into a harness wired for a K400 without a pin adapter.

On the OEM versus aftermarket question: Elite’s OEM keypads are well-built, but the aftermarket options from DoorKing and Linear use compatible Wiegand wiring and often hold up better in salt air. For Boca Raton beachside properties, we recommend a keypad with a sealed stainless face and a silicone membrane under the buttons. The cost difference is modest, usually $40-$70, and the lifespan difference in this climate is real. We’ll show you both options with pricing on each before you decide.

Signs Your Elite Keypad & Intercom Repair Is Failing

• Keypad lights up but the gate doesn’t move. The membrane has de-laminated from the circuit layer. Pressing harder sometimes works for a few days, but the contact is degrading and it will quit entirely, often at night.
• Some buttons work, others don’t. Conductive traces corrode unevenly. The buttons that stopped usually sit in direct sun or catch rain because of how the unit is mounted. Once one row goes, the rest follow within weeks.
• Intercom audio is one-way. You can hear a visitor, but they can’t hear you, or vice versa. That’s the microphone element or the speaker coil. The fix is a component swap, not a full intercom replacement.
• The keypad or intercom shorts after heavy rain. Water is entering through the top seam or a dried-out gasket. The unit may dry out and work again for a few days, but corrosion is advancing inside and the board will eventually fail.
• You have to enter the code multiple times or press very deliberately. The keypad’s contact springs are compressed or the membrane is worn through. The more force you use, the more damage you do to the board underneath.

Before

After

Replacement Cost & What’s Included

In Boca Raton, an Elite keypad replacement runs $245-$385 installed, depending on whether you need a basic K200-compatible unit or a sealed stainless keypad with a new housing and mounting bracket. Elite intercom repairs range from $195 for a speaker or microphone element swap up to $420 if the intercom board or the amplifier module needs replacing. Every quote is written and handed to you before we open a tool bag, and that written number is the number you pay. No surprise line items at the end.

Every replacement includes the part, the labor, the wiring check at the keypad and at the control board, and the programming of your existing codes into the new unit. We also photograph every connection we touch, before and after, and leave you that photo log along with the part number we installed. The work is covered by our 365-Day Done Right Promise: if the keypad or intercom acts up within the year, we come back and make it right at no charge.

Boca Raton Keypad & Intercom Repair Pricing

• Elite keypad replacement (standard membrane): $245-$310 installed
• Elite keypad replacement (sealed stainless, salt-air rated): $315-$385 installed
• Intercom speaker or microphone element replacement: $195-$260 installed
• Intercom board or amplifier module replacement: $340-$420 installed
• Keypad and intercom full replacement package: $520-$710 installed

The range depends on the model, the age of the wiring, and whether we need to replace the mounting pedestal. We’ll show you the exact price, in writing, before any work starts. That’s Haven Standard Clause 1, and it applies to every job in Boca Raton.

DIY or Call Us?

There’s a small list of things worth checking before you call: confirm the breaker didn’t trip, look for an obvious cracked housing or separated wire at the keypad, and check whether the keypad works with the physical key override. Those take five minutes and cost nothing. Beyond that, this is low-voltage wiring tied to your gate’s control board, and the mistake to avoid is crossing the wrong pair and frying a board that would have cost nothing to keep. The control board is not a forgiving component, and a keypad wired backward can take out the receiver module with it.

We’re happy to talk you through the five-minute checks on the phone before you commit to a service call. Live person, any hour. If it turns out you need us, we’ll schedule the visit and name the price before we arrive. Call (754) 666-7602 and we’ll sort out what’s worth checking in your particular setup.

FAQs