A Vance company - serving Boca Raton, FL

Ghost Controls Gate Motor & Opener Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Gate Motor & Opener in Boca Raton: What to Know First

Ghost Controls gate motor and opener repair in Boca Raton typically runs $180-$340 for board and limit-switch work, and $450-$900 when the motor itself has failed and needs replacement. We service every Ghost Controls model line currently on driveways in Boca Raton, from the original AXDP and TSS1 swing arms to the newer RAC and TDS2 series. Most repairs are completed same-day once we’re on site, because we carry the parts that actually fail rather than ordering after diagnosis.

Call (754) 666-7602

If you own a Ghost Controls opener and the gate is stalling, reversing, or dead, you’re on the right page. We’re an independent Ghost Controls service provider in Boca Raton, which means we repair what’s on your driveway and never steer you toward a brand change unless your own hardware gives us a reason. Call (754) 666-7602 and we’ll get a technician to your property with a written price before any tool comes off the truck.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds a solid residential opener, but eleven years of working on them in Boca Raton has taught us exactly where they break. Here’s what we find most often:

  • AXDP and TSS1 actuator gear wear. The nylon internal gears in the original swing-arm actuators strip gradually, usually after five to seven years of daily cycling. The symptom is a gate that moves a few inches, groans, and stops. We replace the actuator, and before you ask: aftermarket gears exist, but we don’t install them. The labor is the expensive part of an actuator job, and we’re not putting a $40 gear set inside a housing that took an hour to pull apart. Replacement actuator goes in, limit switches get set, gate runs clean.
  • TDS2 and RAC control board capacitor failure. Florida heat and daily lightning-season surges take out the electrolytic capacitors on these boards. The opener will work intermittently, then click and go dead, then come back a day later. We bench-test the board on-site, confirm the capacitor has swollen, and replace the board or the capacitor depending on condition. This is one repair where we will do component-level work, because a capacitor swap on an otherwise healthy board is a $180 fix versus a $400+ board replacement.
  • Limit switch drift on all swing-arm models. Ghost Controls swing arms use magnetic reed-switch limits. Humidity and salt air in Boca Raton, especially closer to the Intracoastal, cause the magnet carriers to corrode and slip. The gate overtravels and slams the post, or stops ten inches short. We reset the limit position, photograph the new reading (Clause 4: Evidence on every job), and replace the carrier if it’s corroded beyond holding a set.
  • Battery backup that won’t hold a charge on the AXDP and TDS2UPS. This one is classic southern Florida: the sealed lead-acid battery inside the backup module swells in the heat, cracks its case, and leaks. The opener still works on line power, but the moment you lose utility power during hurricane season, you’re locked out or your gate sits open. We replace the battery with a fresh SLA unit, test the charging circuit, and note the replacement date on your job record so you know when it’s due next. No one else in Boca Raton is going to hand you a replacement schedule.
  • Photo-eye misalignment on every Ghost Controls model with an obstruction beam. These infrared eyes, one transmitter and one receiver, are mounted at the base of the gate frame. A weed trimmer, a kid’s bike, or a landscaping crew bumps one out of position and the opener beeps but won’t close. We realign the beam, verify it breaks and stops the gate correctly, and document the alignment with a photo before we leave.

Our Ghost Controls Gate Motor & Opener Process

Technician performing maintenance on an automatic sliding gate motor
Our Ghost Controls Gate Motor & Opener Process

Every Ghost Controls job follows the same sequence, whether it’s a $180 limit switch reset or a $900 actuator replacement. Nothing gets skipped because we’re fixing your gate, not rebuilding it blind.

  1. 1
    You call (754) 666-7602. A live person answers, 24 hours a day, every day. You describe what the gate is doing. We’ll tell you over the phone what it likely is and what the flat price range is for that work. You get a number before you hang up.
  2. 2
    A named technician arrives. Background-checked, uniformed, and you get their name and photo before they drive to you. Adrian Vance built this habit on commercial access-control sites starting in 2014, and it carried over to every residential driveway gate we touch.
  3. 3
    We diagnose, then we write. Before any work starts, we hand you the written price. Haven Standard Clause 1: Have it in writing. What we found, what it costs, what we’re doing. You sign. Then tools come out.
  4. 4
    Parts decision, explained. If a part needs replacing, we tell you whether OEM Ghost Controls is worth it, or whether a quality aftermarket component does the same job for less, and why. On Ghost Controls actuators and boards, we’re OEM-first, because the warranty and longevity justify the price. On batteries and photo-eyes, a good aftermarket part is often the smarter spend, and we’ll tell you that too.
  5. 5
    The repair, then the documentation. We fix what’s broken, reset what’s drifted, and photograph everything: the part removed, the part installed, the limit reading, the beam alignment. You get a photo log and a written record of every adjustment and part number before we leave. This is the same wiring-diagram habit that came out of commercial access control, applied to your driveway.
  6. 6
    We stand behind it for a year. The 365-Day Done Right Promise covers every completed Ghost Controls repair. If it’s not right, we make it right. No argument, no fee, no expiration date within that window.
BeforeBefore
AfterAfter

What Ghost Controls Gate Motor & Opener Costs in Boca Raton

Real numbers for the Ghost Controls work we do in Boca Raton. These are flat, written prices you’ll see before we ever pick up a tool:

Ghost Controls Job Typical Price Range What Moves the Price
Limit switch reset / adjustment $180-$260 Whether the magnet carrier needs replacing
Photo-eye realignment or replacement $140-$220 Beam vs. wiring issue
Control board capacitor repair $180-$320 Component-level fix vs. full board replacement
Full control board replacement (AXDP, TDS2, RAC) $380-$600 Model and whether surge protection was present
Actuator replacement (swing arm models) $450-$900 Single or dual actuator, post bracket condition
Battery backup replacement $190-$320 Battery type, charging circuit health

The price you’re quoted is the price you pay. No discovery fees, no surprise invoice at the end. We write it down before we start, and you keep that paper. For an exact quote on your Ghost Controls opener in Boca Raton, call (754) 666-7602. Estimates are free, and we’ll give you the number over the phone.

Why Boca Raton Homeowners Call Vance Gate Repair Boca Raton for Ghost Controls Work

Technician installing a gate latch repair mechanism outdoors
Why Boca Raton Homeowners Call Vance Gate Repair Boca Raton for Ghost Controls Work

Most gate companies in Boca Raton will give you a verbal estimate and a handshake. We do something different. Every Ghost Controls repair goes through the Haven Standard: a written scope, a written price, and photographic evidence on every single visit. You’ll see what we saw and what we did.

We’re the gate specialist that prices in writing before anyone touches the property. That means no one pays twice to rediscover the same problem. If a control board fails next year, your job record tells the next technician exactly what capacitor went in, what the limit switch was set to, and what the charge voltage was. No guesswork. Under Clause 4 (Evidence on every job), every visit includes that documented photo record at no additional charge.

We work on Ghost Controls every week, but we also service LiftMaster, Mighty Mule, DoorKing, and the rest of the nine major automation brands. If your Ghost Controls opener has truly reached end of life, we’ll tell you what that means in real dollars and hand you options, not a sales pitch. And if another company quoted you something that seems high, bring it to us. We’ll review it free as a second opinion.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Gate Repair help in Boca Raton? Licensed & insured · same-day response · free estimates
Call (754) 666-7602
Local Service Coverage

Request a Free Estimate in Boca Raton

Tell us what you need - Vance Gate Repair Boca Raton responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and consent to receive communications through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch