Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Delray Beach, FL
Gate repair in Delray Beach runs into two problems more than anywhere else we work: access-control failures inside the big 55+ communities, and rusted or snapped steel on gates that have been breathing Atlantic salt air for 25 years. Most calls start with a gate that won’t open from a keypad or a swing gate sagging on a hinge that’s lost half its metal to corrosion. We come out, write down what we found, hand you a flat price before we touch anything, and leave a photo record of every adjustment. Call (754) 666-7602 and a live person answers.
Why Delray Beach Homes Are Different
Delray Beach has one of the densest concentrations of large-scale 55+ gated communities in Florida. Kings Point alone has thousands of units, and its gate operators run near-commercial duty cycles, processing hundreds of vehicle entries a day. A single HOA call in Kings Point can mean servicing four to six gate stations in one visit, each with its own loop detector, intercom stack, and operator. When one fails, deferred maintenance on the others surfaces immediately.
The housing stock is mostly HOA-governed communities built from the 1970s into the early 2000s. Many still run original or first-replacement operators from LiftMaster, Linear/GTO, or Elite. Those units are now 20 to 35 years old and undersized for current traffic. Wrought-iron swing and slide gates are standard. In the oldest communities, underground electrical conduit has degraded in sandy, moisture-saturated soil, which means intermittent power faults that look like a motor problem but aren’t.
We also deal with salt. Delray Beach sits one to two miles from the Atlantic, and the sea breeze accelerates oxidation on hinges, pivot hardware, gearboxes, and control boards. After a hurricane, storm surge floods gate motor housings in low-lying communities east of I-95, and we get clusters of simultaneous failures across a dozen streets.
Our Main Delray Beach Services
Two jobs dominate Delray Beach gate work: access-control repair on community gates that see hundreds of entries daily, and structural repair on aging iron gates. Homeowners also call us for full replacements and motor swaps, which have their own pages here.
Gate Repair in Delray Beach
Most repair calls in Delray Beach are swing gates with failed operators, snapped hinge welds, or misaligned photo-eyes. We diagnose the exact failed component, show you the damage in a photo, and quote a written flat price before any work begins. Gate Repair in Delray Beach covers the full breakdown of common failures and what they cost to fix.

Gate Installation in Delray Beach
New gate installations in Delray Beach usually mean working inside an HOA with specific architectural guidelines and sometimes a permit requirement. We handle the full scope: gate fabrication, operator mounting, safety edges, and the underground conduit run. Gate Installation in Delray Beach details the process from site measure to final inspection.

Gate Motor & Opener in Delray Beach
Motor replacements in Delray Beach often involve swapping a 20-year-old operator for a new one matched to the gate’s weight and duty cycle. In Kings Point and similar communities, we size operators for near-commercial traffic, not residential weekend use. Gate Motor & Opener in Delray Beach lists the brands we install and the cost ranges for each.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Delray Beach

Gate access control in Delray Beach means keeping hundreds of residents moving through a gate every day without the system locking up. In communities like Kings Point, a failed keypad or a burned-out loop detector doesn’t just annoy one homeowner; it backs up traffic on the main drive and triggers calls to the HOA board within minutes. Our Gate Access Control work covers keypad entry, phone entry, card readers, video intercoms, and the loop detectors underneath the pavement. We troubleshoot the whole chain, from the keypad to the operator board, because in Delray Beach the failure is rarely in the place the resident thinks it is.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or the display is dim, or the gate opens intermittently after a code is entered.
What it costs in Delray Beach
Keypad replacement in Delray Beach typically runs $180 to $420, including the new unit and programming.
How we do it
We test voltage at the keypad, replace the unit if needed, program all resident codes, and photograph the new wiring.
Phone Entry
Signs you need it
The gate won’t dial out to a resident’s phone, or calls connect but the gate won’t open from the phone keypad.
What it costs in Delray Beach
Phone entry system repair in Delray Beach ranges from $150 to $500 depending on whether we’re replacing a relay, reprogramming the directory, or installing a new cellular unit.
How we do it
We trace the phone line or cellular signal, test the relay at the operator, and document every setting change.
Video Intercom
Signs you need it
The video feed is blank, the audio is one-way, or the door release button doesn’t trigger the gate operator.
What it costs in Delray Beach
Video intercom repair in Delray Beach typically costs $200 to $600 depending on whether the issue is a failed monitor, a bad camera, or a broken release relay.
How we do it
We test the camera, monitor, and release circuit separately, replace only the failed component, and leave a written record.
What Gate Access Control Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Keypad replacement | $180 - $420 |
| Phone entry system repair | $150 - $500 |
| Video intercom repair | $200 - $600 |
Does my HOA need to approve access control changes in Delray Beach?
Yes. Almost every Delray Beach gated community requires HOA approval before changing access-control hardware. We can provide a written scope and photo documentation for your board before any work starts.
Can you work on the access system at a Kings Point gate station?
Yes. We regularly service multi-station access systems in Kings Point and other Delray Beach 55+ communities. A single visit can address several gate stations, each with its own keypad, intercom, and loop detector. Call (754) 666-7602 and we’ll coordinate with your property manager.
Gate Parts & Welding in Delray Beach

Gate parts and welding in Delray Beach are dominated by one material reality: salt air eats mild steel. Hinges, pivot plates, and the bottom rails of wrought-iron gates corrode from the inside out, and by the time a gate sags or drags, the metal has often lost half its thickness. Our Gate Parts & Welding service covers hinge replacement, post replacement, rail repair, custom welding, and gate rollers. We weld on site, match the existing steel profile, and photograph every repair before we leave.
Hinge Replacement
Signs you need it
The gate sags on one side, scrapes the ground, or the hinge pin has worn an oval in the hinge barrel.
What it costs in Delray Beach
Hinge replacement in Delray Beach typically ranges from $150 to $350 per hinge, depending on the weight of the gate and whether we need to reinforce the post.
How we do it
We cut off the old hinge, weld a new one to the post and gate frame, and photograph the weld before paint.
Post Replacement
Signs you need it
The gate post leans, has cracks at the base, or the gate won’t stay level no matter how many times the hinges are adjusted.
What it costs in Delray Beach
Post replacement in Delray Beach runs $300 to $700 per post, including concrete set and the labor to remount the gate.
How we do it
We remove the old post, set a new galvanized post in concrete, and remount the gate with new hinges.
Gate Rollers
Signs you need it
The gate shudders when it opens, the rollers are flattened or rusted, or the gate has worn a groove in the track.
What it costs in Delray Beach
Gate roller replacement in Delray Beach typically costs $120 to $300 per set, including the new rollers and track alignment.
How we do it
We replace the roller assembly, align the track, and test the gate through a full open-close cycle.
What Gate Parts & Welding Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Hinge replacement | $150 - $350 per hinge |
| Post replacement | $300 - $700 per post |
| Gate roller replacement | $120 - $300 per set |
Can you weld a gate without removing it from the post?
Yes. We do most Delray Beach gate welding on site with the gate still hung. Removing a gate adds labor and risk of misalignment. We weld, grind, and paint in place, then photograph the repair.
Do you match the old ironwork when you weld a repair?
We match the steel profile and the weld style as closely as the original permits. On older Delray Beach gates, the original iron may be a non-standard size, so we’ll show you the closest match before welding. The price is agreed in writing first.
Brands We Service in Delray Beach
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Delray Beach gates run Linear or DoorKing operators, and we keep common parts for both on the truck. See our brands for the full list.
Pricing for Gate Repair in Delray Beach, FL

| Service | Typical range in Delray Beach |
|---|---|
| Keypad replacement | $180 - $420 |
| Phone entry system repair | $150 - $500 |
| Video intercom repair | $200 - $600 |
| Hinge replacement | $150 - $350 per hinge |
| Post replacement | $300 - $700 per post |
| Gate roller replacement | $120 - $300 per set |
| Swing gate motor replacement | $650 - $1,500 |
| Slide gate motor replacement | $800 - $1,800 |
| Access control system install | $900 - $2,500 |
| Full gate installation | $2,500 - $8,000 |
In Delray Beach, salt corrosion and HOA access rules push some prices toward the higher end. A rusted post that needs replacement before a hinge can be welded adds labor. The price we hand you before starting is the price you pay. No surprise invoice at the end.
Neighborhoods We Serve in Delray Beach
We work throughout Delray Beach, from the 55+ communities west of Jog Road to the canal-front subdivisions east of I-95. Most calls get a same-day or next-day visit, and a live person answers the phone around the clock.
- Kings Point
- High Point
- Lakes of Delray
- Delray Villas
- Tropic Isles
Service Area - Cities Near Delray Beach

We also serve Boynton Beach, FL to the north, Boca Raton, FL to the south, and Deerfield Beach, FL just past the county line. West of Delray Beach, we cover Coconut Creek, FL as well. Dispatch and scheduling are coordinated from our Miami (South FL) office, and crews serve Delray Beach locally.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Delray Beach

Most Delray Beach emergency calls get a same-day visit, and a live person answers the phone 24/7. If a gate is stuck open in a gated community, we prioritize it because it’s a security issue for every resident. Call (754) 666-7602 and you’ll talk to a person, not a voicemail.
Yes. We work directly with Delray Beach HOAs and property managers, including multi-gate communities like Kings Point. We can bill the association, provide written scopes for board approval, and document every visit with photos for your records.
For most repairs, no permit is required in Delray Beach. New gate installations or work that changes the gate’s footprint may require HOA approval and sometimes a city permit. We’ll tell you before any work begins, and we handle the paperwork when it’s needed.
If your gate is stuck, sagging, or not answering the keypad in Delray Beach, call (754) 666-7602. We’ll give you a written price before we start and a photo record when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Delray Beach Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.





Before
After
Before
After