Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lighthouse Point, FL
Gate access control in Lighthouse Point means one thing above all: salt. The city’s canal grid puts nearly every driveway within feet of brackish water, so keypads, card readers, and intercoms corrode from the inside out faster than they do almost anywhere else in Broward County. We replace and re-seal those components constantly, and we wire every new job for the humidity that never quits here. Call (754) 666-7602 and you’ll get a live person, a written price, and a technician who already knows what your gate is up against.
Why Lighthouse Point Homes Are Different
Lighthouse Point developed from the late 1950s through the 1970s as a planned waterfront community, and that’s shaped the gate work we see today. Driveways are long, frontages are wide, and the original ranch homes have mostly been renovated or rebuilt into larger estates. The gates themselves skew ornamental: wrought-iron swing arms, powder-coated aluminum sliders, and increasingly, automated operators tied to phone and video entry systems.
What doesn’t vary is the environment. Salt-laden air off the Atlantic and evaporating canal water attacks ferrous gate hardware around the clock, not just during hurricane season. We routinely find swing-gate hinges rusted through at the base weld, and control boards corroded behind the cover plate on gates less than five years old. Wrought iron, beloved in this city for its curb appeal, wicks moisture up from canal-adjacent soil and fails first at the bottom rail and post bases. The fix is almost always marine-grade: hot-dip galvanized framing, stainless hardware, and sealed enclosures rated for coastal exposure.
Our Main Lighthouse Point Services
Lighthouse Point homeowners call us most often for two things: fixing what the salt has eaten, and replacing it with something that lasts longer this time. Here are the three service pages covering what we do in this city.
Gate Repair in Lighthouse Point
Repair work here usually starts with a hinge, a weld, or an operator that’s stopped mid-travel. We inspect what’s failed, write the price, and document every step with photos. On canal lots, we default to stainless or hot-dip galvanized replacement hardware because standard steel simply doesn’t hold up. Full details are on the Gate Repair in Lighthouse Point page.
Gate Installation in Lighthouse Point
Most installations in Lighthouse Point are replacements for rusted-out wrought iron or upgrades to heavier ornamental sliders. We anchor into concrete pillars, select storm-rated operators, and leave a written record of every spec. The Gate Installation in Lighthouse Point page walks through the whole process.
Gate Motor & Opener in Lighthouse Point
Motors fail here for two reasons: corrosion inside the housing and limit switches drifting out of adjustment as gates flex in the wind. We service nine automation brands including LiftMaster, FAAC, and BFT. See Gate Motor & Opener in Lighthouse Point for makes, models, and symptoms.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Lighthouse Point
Gate access control in Lighthouse Point is the layer between your driveway and the rest of the canal grid. We work on keypads, remotes, phone entry, card readers, and video intercoms, and we document every job with photos and written specs under Haven Standard Clause 4. In this climate, outdoor keypads and card readers fail early unless they’re properly sealed and spaced off the mounting surface, so we use standoff hardware and marine-grade enclosures on nearly every install. Our Gate Access Control service hub covers the full range of what we wire, program, and replace.
Keypad Entry
Signs you need it
The keypad works only when pressed hard, several buttons do nothing, or the code resets after rain.
What it costs in Lighthouse Point
A replacement keypad on a Lighthouse Point gate typically runs $140-$280 installed, depending on whether the cable from the operator is still usable.
How we do it
We pull the old unit, mount a weather-sealed replacement on standoffs, splice into the existing low-voltage cable if it tests good, then program and photograph the finished install.
Video Intercom
Signs you need it
Callers ring but the indoor monitor stays dark, audio cuts out while the gate is moving, or the camera lens has gone cloudy from salt film.
What it costs in Lighthouse Point
Video intercom replacement here runs $400-$900 installed, depending on monitor size and whether new wire needs to be pulled through existing conduit.
How we do it
We test the cable run, replace or rebuild the outdoor station, pair the new monitor to the gate operator’s relay board, and leave a photo log of every connection.
What Gate Access Control Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Access control service call | $75-$120 |
| Keypad replacement (parts and labor) | $140-$280 |
| Video intercom install or replacement | $400-$900 |
Can you install a keypad on an existing gate in Lighthouse Point?
Yes. We test the existing operator first to confirm it has a compatible input, then run low-voltage wire from the keypad location to the board. The work is quoted in writing before we start.
Does salt air really damage access control equipment?
It does. Brackish canal water and Atlantic humidity corrode the contact points on keypads and the lens gaskets on intercoms faster than inland locations. We specify sealed enclosures and marine-grade fasteners here for that reason.
Gate Parts & Welding in Lighthouse Point
Gate parts and welding in Lighthouse Point is less about convenience and more about structural survival. The same salt air that corrodes electronics attacks steel at the weld points, and we regularly find hinge barrels seized solid and bottom rails rusted thin on gates less than a decade old. Our Gate Parts & Welding service covers hinge replacement, post work, rail repair, custom welding, and roller swaps, all documented with before-and-after photos.
Hinge Replacement
Signs you need it
The gate sags enough to scrape the driveway, or the hinge squeals and you can see orange rust streaking down from the pin.
What it costs in Lighthouse Point
Expect $200-$450 per set depending on gate weight and whether the post needs reinforcement.
How we do it
We support the gate, cut off rotted hardware, weld stainless or galvanized replacements to clean steel, then rebalance the gate and photograph the finished welds.
Custom Welding
Signs you need it
A gate rail has cracked through, a picket has snapped at the base, or a vehicle hit the gate and bent a corner beyond straightening.
What it costs in Lighthouse Point
Custom welding runs $250-$700 per repair depending on the length of the cracked section and whether we’re reusing or replacing material.
How we do it
We cut back to sound steel, weld in matching or upgraded stock, grind the joint clean, and coat it with primer and paint matched to your gate.
What Gate Parts & Welding Costs in Lighthouse Point
| Item | Typical range in Lighthouse Point |
|---|---|
| Weld-only repair (no new material) | $150-$300 |
| Hinge, roller, or post repair | $200-$500 |
| Custom welding with new material | $250-$700 |
Can you weld wrought iron so it doesn’t rust again in six months?
We can. We cut back to clean steel, use galvanized or stainless replacement stock where possible, and seal the joint with marine-grade coating. In Lighthouse Point, we recommend this upgrade on every bottom-rail repair.
Do you replace gate rollers on sliding gates?
Yes. Worn rollers on canal-front sliders collect salt and seize up, which makes the gate drag. We replace rollers and clean or replace the track, then photograph the finished travel test.
Brands We Service in Lighthouse Point
We service LiftMaster, FAAC, BFT, and Linear operators in Lighthouse Point, and we keep common replacement parts for those brands on the truck. Most jobs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Repair in Lighthouse Point, FL
| Service | Typical range in Lighthouse Point |
|---|---|
| Gate repair service call | $75-$120 |
| Access control service call | $75-$120 |
| Keypad replacement | $140-$280 |
| Video intercom install or replacement | $400-$900 |
| Phone entry system replacement | $300-$700 |
| Card reader replacement | $150-$350 |
| Remote control programming | $50-$100 |
| Weld-only repair | $150-$300 |
| Hinge, roller, or post repair | $200-$500 |
| Custom welding with new material | $250-$700 |
Lighthouse Point pushes the high end of most ranges because salt damage often means the bracket, the post, and the cable all need attention at once, not just the part that failed. The price we quote you is the price you pay, written and agreed before any work begins, under Haven Standard Clause 1.
Neighborhoods We Serve in Lighthouse Point
We cover all of Lighthouse Point, from the canal-side estates east of Sample Road down to the quiet streets near Northeast 50th. Most calls get a technician dispatched the same day, with a documented record left behind on every visit.
- Canal Drive estates
- Light House Point Isle
- North Lighthouse Point
- South Lighthouse Point
- West Lighthouse Point near Federal Highway
Service Area - Cities Near Lighthouse Point
We also serve the surrounding coastal and inland cities. If you’re in Boca Raton, FL, Deerfield Beach, FL, Delray Beach, FL, or Coconut Creek, FL, the same written-price, documented-work standard applies. Call (754) 666-7602 and a live person answers.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lighthouse Point
Most Lighthouse Point calls get a technician on site the same day, often within a few hours. A live person answers the phone around the clock, so you’ll never sit through a voicemail loop. The exact arrival time is confirmed when you call, and the name and photo of your technician are sent before dispatch.
Most repairs on existing gates, including motor replacement, hinge welding, and access control installs, don’t require a permit in Lighthouse Point. Full replacement or new construction may involve city review, and we can advise on what applies to your specific project before any work is scheduled.
The written price covers the labor, the parts, and the documented photo record of what was found and what was installed. It’s handed to you before work begins under Haven Standard Clause 1, and it won’t change unless you approve additional work in writing. No surprise invoice at the end.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lighthouse Point Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.